Pulverizador de pintura sin aire BAIKE 1395 similar al Graco 795
1395高压无气喷涂机是一款高品质的工业喷涂设备。它采用高压无气喷涂技术，可提供均匀、平滑的喷涂效果。该机器的设计和制造符合国际安全和质量标准，广泛评估建筑、家具制造等行业的喷涂作业。
技术规格：
110/220 50/60 Hz
Tamaño máximo: 22,7 MPA.
Capacidad de llenado: 4,5 l/min.
Modelo: 3.6HP
电机类型：无刷电机
最大支持喷嘴数：633
Tamaño: 39kg/55kg59*55*63cm
配置：
- 一台主机
- 1/4*20M高压管1条
- 1 SG3 喷枪
- 0.5M1延长杆
- 1瓶润滑剂
- 工具包
- 说明书
Styled With
Before use
Check the power supply voltage (ensure it matches the equipment specifications), inspect the grounding wire for proper connection (to prevent electrical leakage), examine the high-pressure hose, spray gun, and connectors for any damage or loose connections, select the appropriate nozzle and install it securely, ensure the paint is thoroughly mixed and filtered (to prevent nozzle blockage), verify the paint viscosity is appropriate (if too thick, dilute according to product specifications), and perform a test spray on scrap cardboard or an open area to adjust the pressure.
in use
When spraying, always keep the nozzle perpendicular to the surface and move it evenly. Do not point the nozzle at people or body parts (high-pressure spray can pierce the skin). The spray gun must have a safety lock device. Lock the trigger when not in use. Keep the nozzle clean. If it becomes blocked, shut down the machine, release the pressure, and then clean it.Do not disassemble the machine's pressurised components without authorisation.
Before use
After spraying is complete, the pressure must be released (turn off the power supply and open the pressure relief valve). Immediately rinse the piping, spray gun, and pump body with a cleaning solution (clean water or diluent) to remove any residual paint, preventing the pump body from clogging due to paint buildup. Regularly inspect the seals and filters, and replace them promptly as needed.